Before & After Photos

This part of the sidewalk leading up to the front porch had sunk a good three to four inches into the ground, which was a growing nuisance for the homeowners. This made things like carrying groceries into the home much more dangerous than before. The slab was also directing rain water down underneath the gap between the sidewalk and the front porch. By raising the sidewalk with our foam jacking services, we were able to eliminate both of the aforementioned problems. The sidewalk also looks a lot better, and is prevented from sinking any time soon.

This sinking front porch slab was raised using the Polylevel injection system.  PolyLeveling requires using a foam that gets injected under the slab.  The foam fills the voids underneath the slab and raises it up to the correct height.

This homeowner called us regarding problems with their porch that was sinking.  We used PolyLevel injections to resolve the problems for the homeowner.  

PolyLevel Foam is able to raise concrete slabs on sidewalks, driveways, and porches.  A small hole is drilled into the concrete, and then the PolyLevel foam is injected under the concrete to be raised.  The PolyLevel Foam fills the voids underneath the concrete slab and raises it up.  The hole that was drilled into the concrete was patched, and the porch will be ready to walk on again in about 15 minutes. Note how the gap is closed between the siding on the home and then concrete slab. 

This home had a sidewalk slab that was sinking.  We used a Polylevel injection system to raise this slab back into place, and then sealed it at the joints. 

This home had some driveway slabs near the garage that had sunk, making it difficult to pull into the garage.  We used the Polylevel injection system to resolve this problem.  Now the Slab is level with the garage floor, and it will be much easier to use the garage.