Before & After Photos

These homeowners were experiencing sinking in their driveway near the garage apron, causing a noticeable bump whenever they pulled their car in and out of the garage. This issue was both an eyesore and a constant annoyance.

To resolve this problem, we used our polyurethane foam to lift and level the concrete back to the garage's original level. The foam is injected under the slab, where it fills the voids, expands, hardens, and lifts the slab back into place.

The homeowners were thrilled with this solution, finding it more permanent than mud jacking, and they were ready to enjoy their improved driveway throughout the summer months!

These homeowners had several large cracks on the side of their driveway near the garage. They were also experiencing some settling and voids in other areas concerning them. They were looking for a company that could fix it well and not cost an arm and a leg. So they called Thrasher. Beau Morris went out to their home to do the inspection. He found that the soil from underneath the slab was washed out, and that's why voids were appearing and cracking the concrete. 

To fix this issue, we used our concrete protection 2-part system, including PolyLevel, to lift and level the settled concrete and then NexusPro to seal all joints and cracks. 

The homeowners were amazed with the finished product, and happy Thrasher could get it done.

This sidewalk was in need of a makeover. PolyLevel foam was used to raise the uneven spots back to a level surface, then we used NexusPro to seal the joints protecting the concrete from future damage. The sidewalk now is protected and looks brand new!

This homeowner had a hot tub in the middle of his patio. The concrete under was starting to settle, and he did not want water pooling up next to his home. He was having troubles getting anyone to come out to look at this. He saw Thrasher's ads, and decided to give us a go. He liked that we were local and family owned! System Design Specialist, Brock Scott, came out to meet with him. Brock determined the concrete along the home was settling due to fill soil, and water collection. He also noticed the weight of the hot tub was not helping. Brock proposed we seal up the joint along his home with NexusPro Join Sealant, as well as his expansion joints to prevent the area around them from settling. He also proposed we use PolyLevel foam to lift and level the concrete back to where it belongs. Even though the hot tub could not be moved completely out of the way, we were still able to get this project completed. This homeowner was so happy with the finished product! There is no doubt that he is relaxing in his hot tub, worry free of any more settling or unwanted water collection.  

This homeowner was having water pool up next to their steps at their front door. This was due to a concrete slab that had sunk 2.5". 

We came out and lifted the concrete back to its original position by using PolyLevel. We then used Nexus Pro to seal the concrete joints where the slab was up against the house. This will prevent water from getting in between the concrete and the house.