Before & After Photos

This homeowner was dealing with a repetitively sinking compression guard, creating a trip hazard. The fix the sinking concrete slabs, we used PolyLevel, an injectable foam, to lift the driveway back to its original position. After the PolyLevel, we re-set the compression guard. 

This homeowner has an issue with animals living under the driveway and wanted the voids filled without having to replace the concrete. After taking a look at the issue, we decided to apply our three-part concrete repair solution. This includes PolyLevel to stabilize the concrete, NexusPro to seal the cracks, and SealantPro to protect the concrete from future damage. 

This customer was concerned about their falling and cracked driveway, worried it was only going to get worse. Luckily, we were able to protect this homeowner and others from the tripping hazard. To do this, we used PolyLevel, an injectable foam, to lift and stabilize the concrete. Next, we used NexusPro to seal the joints and cracks and ensure that this driveway would survive harsh weather conditions. 

This homeowner had many cracks in his concrete and was worried that his driveway would cave while driving on it. He has worked with Thrasher in the past and was very happy with the results so he called us to help him with the problem. We used our PolyLevel foam system to even out the concrete and then we sealed the joints and cracks using NexusPro. This will make sure his driveway is safe and protected! 

Robert L. is a proud homeowner in Waynesville, MO and wasn’t content with the appearance of the concrete around his property. The walkway leading to the front door wasn’t sealed properly, the front stoop had multiple cracks, and the driveway had large voids from the concrete settling. Robert was familiar with Thrasher’s reputation and dedication to providing a quality solution, so he gave us a call to come inspect his concrete.

To begin the project, System Design Specialist Miles Bearden arrived in Waynesville, MO to undergo a full inspection of the surrounding concrete. The customer opted to have us install our 2-part concrete protection system that consists of our PolyLevel foam and NexusPro sealer. PolyLevel is installed first by injecting it underneath the concrete to fill the voids and level-out the surface. NexusPro is then applied to all cracks and control joints to permanently prevent any water from entering and causing further damage.

Robert was pleased with the outcome of the project and gave Thrasher a five-star review. He was thrilled to have his concrete looking flush and protected in order to stand the test of time.