Before & After Photos

This porch step had sunk significantly on one side and the sidewalk had become significantly uneven. PolyLevel, a process in which high-density polymers are injected into the voids under the concrete to fill them and lift the slabs, was a perfect solution. It didn't take much for these slabs to rise up and level out so that they look just as good as the day they were poured.

Two pieces of concrete meeting at an uneven level is a cause for some concern. Not only does it create an unsightly attraction, but it poses a serious tripping hazard if we're talking about a sidwalk.That's why this family in Hastings, MI called us. Using our patented PolyLevel injection foam, we were able to raise this sidwalk back to its original position. After the injection, the owners were able to walk on their slab in as little as 15 minutes. 

A customer from Hastings called us about their unlevel walkway to the their home. They wanted to make sure that they had smooth, level walkway to be safe for their family.  So we came to the house and decided to install PolyLevel which is an advanced polymer injection foam that we blast into the concrete to level it out and make it stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This driveway has an area on the corner where the driveway meets the garage that had fallen about 3/4 inches. The owner wanted a fix because he did not want it getting any worse. We used PolyLevel which is an inject able foam to raise the concrete slab back to the original position. PolyLevel is waterproof and stable so it will not wash away or react with soils. The foam cures in about 15 minutes so you can be back in the garage and on the driveway in no time!

This homeowner called for a solution to the unevenness in his settling driveway. We used PolyLevel which is a strong but light weight foam. This foam is waterproof and stable so it won't wash away or react with soils. It cures in about 15 minutes so it is full load bearing in a short period of time. We then used NexusPro Crack Repair to seal the cracks that formed from the concrete falling. NexusPro prevents water and debris from degrading the slab from below. It is a silicone-based filler and specifically designed to withstand harsh weather. Like PolyLevel, its drying time is quick and it dries in about an hour.