Before & After Photos

One of our awesome customers from East Lansing gave us a call about the concrete at the front of their house. So we drove out there and noticed that there was some cracking and sagging happening, so we installed our PolyLevel technology which is an advanced polymer injection foam that we blast into the concrete to re-level it and make it stronger than ever.  PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

A customer in East Lansing had to ride over a bug bump in order to get into his garage every day. He knew we had the expertise to help so he gave us a a call. We drove to his property and decided to install our PolyLevel which is an advanced polymer based injection foam that we blast into the concrete to level it out and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

We received a call from a homeowner in East Lansing referring to there walkway being a trip hazard. They wanted our help to level it all out, so we drove out to his property to install our advanced polymer based injection foam called PolyLevel. PolyLevel is blasted into the concrete through very small holes which raise the concrete to be level and stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Everyone loves a good pool day. However when it’s the middle of winter in Michigan and the pool is stationed in your driveway, things aren’t looking too great on your end. Clay contacted us after noticing his sunken driveway was becoming a big problem. The ground underneath his old concrete driveway had begun to collapse and erode causing the driveway to curve in and store water.

How can this issue be fixed? Consider PolyLevel Injection Foam. The polymer consists of two liquids that when blended together, create a foam that expands to effectively lift settled concrete. Our PolyLevel Injection foam is quick-curing and non-invasive, meaning the soil surrounding the area will be less likely to experience any further damage.

This family's home had basement block walls that started to bow and settle. This customer had previous work done with Ayers to stabilize other walls in the basement and had no issues with those walls since. We installed Geolock anchors on the newly bowed walls and tightened the locks on the older anchors. The beauty of this solution is that an Ayers technician can service these anchors by tightening it slowly over time and straightening the walls gradually.