Before & After Photos

This homeowner's driveway had uneven and sinking concrete slabs, causing cracks to form. This will only get worse with time if not fixed, will only get worse. To remedy this, the PolyLevel system was injected underneath the concrete through pea-sized holes. This supports the concrete slabs underneath, and slowly fixes cracks over time. This will prevent more cracks from forming, and makes this driveway no longer a tripping hazard to walk on.

In the before photo you can see that the pathway from the front door to the driveway was starting to sink, tilting away from the house. If you look closely at the step up to the house you can see the difference in where the sidewalk should be compared to where it is in the photo. Woods' PolyLEVEL foam injection lifted these concrete slabs back to their original position, and will permanently keep them there. PolyLEVEL foam causes minimal down time as these homeowners were able to walk on this pathway just 15 minutes after completion of the project! 

A concrete sidewalk leading up to a house in Sikeston, MO was sinking, causing it to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the sidewalk and restore peace of mind for years to come!

A driveway was sinking in Sikeston, MO, causing a step to form between it and the garage. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!

Concrete steps leading up to a front door were sinking in Pevely, MO, causing concern. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will improve the safety of the steps and restore peace of mind for years to come!