Click on a photo to enlarge.
Frank of Affton, Missouri had uneven concrete slabs on his front sidewalk which can be a tripping hazard, so he called Woods Basement Systems for a solution. Systems design specialist, Peter N. recommended PolyLevel for the job.
Foreman, Andrew T. installed the PolyLevel. PolyLevel is a high density polyurethane formula which is used to permanently lift and stabilize sinking concrete slabs. Small, dime-sized holes are drilled into the concrete and then the polymer is injected into the void. The holes are covered with cement and within 15 minutes to concrete can be used again so there is no long wait for it to settle.
Now Frank M. can safely use his sidewalk.
A sidewalk in St. Louis, MO was settling, causing a large crack to form. Woods repaired this concrete by first injecting PolyLevel into the slabs, bringing them back up to their original position. NexusPro was also added to seal up the crack, so it doesn't grow. This concrete will stay stable and even for years to come!
A concrete driveway was settling in Saint Louis, MO, causing the slabs to sink, become uneven, and crack. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. Thanks to these systems, this driveway will remain level and restore peace of mind for years to come!
A sidewalk was sinking in Saint Louis, MO, causing the slabs to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the sidewalk and restore peace of mind for years to come!
A concrete sidewalk was sinking in Saint Louis, MO, causing cracks to form. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the sidewalk and restore peace of mind for years to come!