Click on a photo to enlarge.
Susan in Beverly Hills, Florida, faced a troubling issue with her concrete driveway when small voids had formed in the soil underneath. She reached out to us for assistance with stabilizing the driveway so that she could feel safe walking on it again. Our team went to work filling the voids and leveling the concrete using our PolyLevel solution. Once the slabs were stabilized, NexusPro was used to seal the joints and cracks in the concrete to protect against water intrusion underneath the slabs. The result not only fully addressed Susan's stabilization concerns, but also greatly enhanced her driveway’s curb appeal.
In Beverly Hills, Florida, Faye contacted LRE Foundation Repair for help with her concrete driveway. She had noticed cracks forming in several areas, and previous repair work had left mismatched color tones throughout the concrete. Following a thorough inspection by our expert Design Specialist, a plan was created to implement our Three-Part Concrete Protection System to repair and enhance Faye’s driveway. First, our team injected PolyLevel beneath the driveway to lift, level, and stabilize the slabs. Next, we sealed the joints and cracks with NexusPro to protect against water intrusion. Finally, DecoShield was applied to the surface to prevent chipping, flaking, and staining, while also adding a light gray translucent tint for an even color tone throughout. Now Faye’s concrete driveway has been fully transformed with long-term protection and enhanced curb appeal.
A section of Michael's concrete driveway in Crystal River, Florida, had sunk significantly into the ground, posing a severe tripping hazard for himself and others. He knew he had to get his driveway repaired as soon as possible before someone could get hurt, so he contacted LRE Foundation Repair for assistance. A senior LRE Design Specialist visited Michael’s home to conduct an inspection and discovered that the soil underneath the concrete had eroded, causing the slab to sink. To repair the driveway, the LRE team utilized the Two-Part Concrete Protection System, which includes PolyLevel to permanently lift and level the sunken slab and NexusPro to seal the cracks and joints, preventing water from intruding below the concrete and causing more soil erosion. After the repairs, Michael was very pleased with the work done by LRE, as his trip hazard concern was eliminated and his driveway now looked refreshed and renewed.
Timothy from Crystal River, Florida, reached out to us at LRE Foundation Repair with concerns about his sinking concrete patio. After conducting a full home inspection, one of our Design Specialists discovered that the patio had sunken more than an inch, and recommended lifting and leveling the concrete with our PolyLevel solution. Our production team soon went to work injecting PolyLevel directly underneath the patio’s concrete, successfully lifting it back into place and closing the visible gaps between the slabs and the adjacent walls. Timothy was thrilled with the results and can now feel at ease that his patio is permanently stabilized.
Joseph from The Villages, Florida was concerned about his sinking concrete driveway and reached out to LRE Foundation Repair for help. After consulting with an LRE Design Specialist, Joseph was assured that his concrete did not need to be replaced but rather needed protection. The LRE team then implemented the Three-Part Concrete Protection System to restore and protect the driveway. The first step was to inject PolyLevel under the concrete to lift, level, and stabilize the sinking portions of the driveway permanently. Next, Sealant Pro was applied to the concrete to protect against harmful UV rays, moisture penetration, cracking, and discoloration. Finally, the joints and cracks were sealed with the NexusPro solution to prevent water from intruding below the concrete and keep debris out. Joseph was thrilled to see that his driveway had been completely restored, featuring an even, safe level and enhanced protection against wear and tear.