Before & After Photos

A homeowner in Caledonia, MN, knew it was time to schedule their annual maintenance with American Waterworks. After calling our appointment center, the homeowner awaited the arrival of our Service Technician, Edgar. After Edgar arrived at the home, he began inspecting the WaterGuard system that was already installed in the home. Edgar completed the inspection and the system passed with flying colors. Since Edgar was at the home, the homeowner asked about fixing a raised sidewalk. Edgar inspected the concrete and noticed several areas required lifting, the sidewalk and the garage apron. Once he found the problem areas, he could provide the homeowner with a suggested solution. The homeowner agreed and the plans were sent to the office for approval. After they were finalized, they were sent to our Foreman, Ryan, and his crew. Ryan and his crew traveled to the home to begin the project. First, the installed PolyLevel, a polyurethane foam injection solution, underneath the sidewalk and garage apron. Once the PolyLevel installation was complete, the crew shifted their focus to inserting NexusPro on the damaged sidewalk joints. Once all the products were installed, the crew cleaned up their materials and left the lawn cleaner than before. The homeowner was grateful for the work completed by the crew. American Waterworks is happy to continue assisting homeowners after our initial installations. 

A business owner in Caledonia, MN, was growing frustrated by a worsening trip hazard that had formed on the walkway into the business. Not wanting any more congregants to take a tumble, he decided to take action. We set him up with our FREE estimate and a few weeks later our Service Technician, Glenn, headed out to the property. Once Glenn completed his inspection, he told the business owner that we could offer a cheap, non-invasive fix that would keep guests from unnecessary stumbles. Glenn went on to say that our PolyLevel solution is a polyurethane foam that expands when it's inserted under concrete slabs, lifting them back into place. The business owner agreed and work began shortly after. 

When our Foreman, Sam, arrived, he got right to work. He began by verifying Glenn's measurements and then proceeded to strategically drill holes into the slab. Next, he inserted the PolyLevel into the holes and closely monitored the lifting process to ensure no over/under correction was made. 

Once the job was complete our business owner was thrilled to know his congregants no longer had to watch for trip hazards! 

A customer from Onalaska, WI got in touch with us when he began to notice his front walkway was beginning to sink, creating a large gap between the ground and his door. He was afraid that if he left the issue unresolved, he would run the risk of experiencing a nasty trip due to the height difference. When he called in he used his FREE estimate to have our Design Specialist, Romeo, out to his property do a thorough inspection. Once Romeo completed his walkthrough, he recommended our customer use our PolyLevel injection to lift the slab, erasing the gap. Our customer agreed and work began shortly after. 

Our Foreman, Dylon, began the process by strategically drilling holes into the concrete slab. Next, he injected the PolyLevel into the hole. As the foam hardens, it expands, lifting the slab. Dylon closely monitored the process to ensure it returned to the correct place. Finally, he sealed the joints and holes of the project using our NexusPro, a silicone-based sealant for joints and cracks specially formulated to provide long-lasting flexibility and to stand up to harsh weather conditions. Once the job was complete, our customer was happy to know that his worries about tripping were in the past! 

A homeowner in Onalaska, WI was tired of dealing with the problems in his driveway. Over the years many of the slabs had sunk in different directions which resulted in small bumps that his car hit every time he drove in and out of the garage. Not wanting the problems to continue getting worse, he went online to look for an effective solution that would repair his concrete. He found the American Waterworks company website and after looking through what we had to offer, signed up for one of our FREE estimate appointments. The homeowner was eager to learn more about what could be done once our Design Specialist, Will Reader, got to the home to inspect the driveway. Will explained that our PolyLevel foam and NexusPro sealant were the perfect solution for the concrete to be level and smooth again. The homeowner agreed to the installations and later was greeted by our Foreman, Troy Johnson, and his crew. They carefully installed the two products, and the homeowner was very happy with how the project turned out.

If you're ready to make changes to your driveway, you know who to contact! Get your FREE no-obligation estimate with American Waterworks today.

Dan C. in Melrose, WI had a sunken concrete driveway and was tired of dealing with the trip hazard and the large bump every time he drove in and out of his garage. He began researching concrete repair, and was intrigued by our PolyLevel foam concrete solution. He contacted us for a FREE estimate, and we sent one of our Design Specialists, Kevin Kreofsky, to his home to provide him with a solution. Kevin assured him that we could have his concrete raised and leveled in a matter of hours. He was impressed with our products and was glad that our concrete repair solution is affordable, durable and non-invasive, so he scheduled the installation.

One of our PolyLevel experts, Trevor Ellingson, drilled penny-sized holes into the concrete slabs where they needed to be raised. Then, he injected the PolyLevel foam until the concrete driveway was raised and level with the concrete garage. Lastly, he sealed the cracks with our Nexus Pro sealant and cleaned up his work area. Dan was thrilled to see the results immediately! 

Do you have uneven or sunken concrete? We can help! Click here for a FREE estimate.