Before & After Photos

After thorough planning and evaluation, Juan and the Arizona Foundation Solutions team executed the repair using carbon fiber stitching. The process started with precise non-parallel cuts along the cracked areas of the foundation. Then, super high-strength carbon fiber laminates were installed into the cuts to bridge the cracks. Following the installation, low-viscosity polyurea was injected into and around the cracks to secure the carbon fiber and reinforce the structure.

The final step involved smoothing and grinding the repaired area for a polished finish. The entire process was quick, minimally disruptive, and more cost-effective than traditional methods, ensuring the foundation was stronger than before.

The Solution:

Step 1: Non-parallel cuts made along the foundation cracks.

Step 2: Installation of super-strength carbon fiber laminates into the cuts.

Step 3: Filling cracks with low-viscosity polyurea for reinforcement.

Step 4: Grinding the area smooth for a clean, finished look.

Results:

The foundation cracks were completely repaired with high-strength carbon fiber stitching, ensuring the structural integrity of the home. The homeowners were pleased with the quick, efficient process and the professionalism of the team, especially Juan’s oversight and Eli’s expertise in selecting the appropriate repair solution. Thanks to Amanda’s smooth scheduling process, the repairs were completed on time, leaving the homeowners with peace of mind.

Keywords for Reference:

Repair kit stitchkit

Concrete crack repair

Carbon fiber crack repair

Concrete slab foundation crack repair

Stitching kit for concrete cracks

In Gilbert, Arizona, homeowners often face the challenge of dealing with horizontal cracks in their foundation walls, known as stem walls. These cracks, though they might start small, are usually a sign of a bigger problem: oxidizing rebar. Ignoring these cracks can lead to more severe damage over time. Traditional repair methods, such as patching the cracks, epoxy injection, and standard rebar replacement, often fail because they too are susceptible to oxidization, causing the cracks to reopen or new ones to form.

Arizona Foundation Solutions has recognized the need for a reliable and cost-effective stem wall repair system for residential use. John, our experienced Foreman, oversees each project to ensure top-notch quality. Mariel, our Customer Care Representative, efficiently handles all appointment bookings, ensuring a smooth scheduling process. Angel, our skilled Design Specialist, thoroughly evaluates the problem to tailor the best solution for each unique case.

After identifying the problem with oxidizing rebar and its impact on stem wall foundations, Arizona Foundation Solutions has developed a superior repair system. Unlike traditional methods, our concrete stem wall repair system provides a long-lasting solution that prevents future oxidation and cracking. This innovative approach has proven to be the cost-effective answer homeowners in Gilbert, Arizona, have been searching for.

Our team, led by John, the Foreman, ensures the project is executed flawlessly. Mariel, the Customer Care Representative, coordinates appointments seamlessly, making the process convenient for our clients. Angel, the Design Specialist, meticulously evaluates and addresses each stem wall foundation issue, ensuring a tailored and effective repair.

If you're facing stem wall cracks, don't wait for the problem to worsen. Contact Arizona Foundation Solutions today to schedule your free estimate and experience the difference our advanced stem wall repair system can make. We proudly serve Phoenix, Mesa, Gilbert, and nearby Arizona areas.

Project Overview: In Gilbert, Arizona, a homeowner is experiencing stem wall cracking at the front corner of their house. The homeowner is preparing to sell their home, and a realtor referred them to Arizona Foundation Solutions for an inspection. The foreman overseeing this project is Eli, with Amanda handling the booking of appointments, and John (Bo), the design specialist, assessing the issue.

Problem: Stem wall cracks, especially in the dry and harsh climate of Arizona, are a common occurrence. The front corner of this home has visible cracks that may compromise the structural integrity of the foundation, potentially affecting the home’s value during its sale. In many cases, previous stem wall repairs fail prematurely due to improper techniques, such as temporary fixes like epoxy injections or polymer-based methods. These methods do not address the root cause of the issue: rusting rebar caused by chloride ion migration within the concrete.

Goal: The goal of this project is to conduct a thorough evaluation of the stem wall to assess the damage and recommend a long-lasting solution that adheres to the highest industry standards. By engaging Arizona Foundation Solutions, the homeowner aims to resolve the cracks with effective, permanent repairs before selling the property.

After Project Description:

Project Completion Summary: Arizona Foundation Solutions successfully completed the stem wall repair for the homeowner in Gilbert, Arizona, under the guidance of Eli, the project foreman. The customer care representative, Amanda, coordinated the appointments seamlessly, while John (Bo), the design specialist, carefully evaluated the stem wall cracks.

Solution: Following a comprehensive assessment, the root cause of the stem wall cracks was identified as rusting rebar due to chloride ion migration. To ensure a long-lasting repair, Arizona Foundation Solutions employed industry-standard methods, including the removal of damaged concrete, sandblasting the exposed rebar to a pristine condition, and applying a protective ion-blocking epoxy coating. The stem wall was then repaired using an anodic-based repair mortar, which is designed to prevent future rusting and deterioration.

Outcome: The repair not only restored the structural integrity of the foundation but also increased the home's market value by resolving a key structural concern. The repair was completed following all International Concrete Repair Institute (ICRI) guidelines, ensuring a durable and lasting solution that will withstand Arizona's challenging climate. The homeowner can now proceed with the sale of their home confidently, knowing the stem wall has been properly repaired and reinforced.

The foundation of the residential property in Gilbert, Arizona, displayed clear signs of stem wall failure. The homeowner noticed horizontal cracks along the outside foundation walls, indicating potential internal damage. These cracks, initially small, began to expand due to oxidizing rebar inside the concrete. This process not only weakened the structure but also threatened to cause further splitting and spalling if not addressed promptly.

The homeowner consulted with Amanda, our Customer Care Representative, who promptly scheduled a thorough on-site inspection. Eli, our Design Specialist, evaluated the foundation and confirmed that traditional stem wall repair methods, such as patching, epoxy injections, or standard rebar replacement, would not provide a long-term solution. These common repair methods often fail because the underlying issue of oxidation is not effectively addressed, leading to recurrent damage.

After Repair

With Bo as the lead foreman, the Arizona Foundation Solutions team implemented our advanced Concrete Stem Wall Repair System, designed to protect the stem wall from further oxidation and deterioration. Our specialized system involved removing the damaged concrete, treating and sealing the rebar to prevent further oxidization, and applying a durable, non-porous coating to shield against moisture infiltration.

This repair solution not only strengthened the foundation but also safeguarded the property from future structural issues, delivering lasting protection. By opting for our innovative system, the homeowner in Gilbert, AZ, now has a reliable, cost-effective repair solution that is superior to traditional methods and designed for long-term results.

Why This System is Different: Our Concrete Stem Wall Repair System stands out because it addresses the root cause of damage—oxidation of the rebar within the concrete. Unlike traditional repairs, our system prevents future oxidation, stopping the cycle of cracking and splitting. It is an affordable, practical solution for residential homes and doesn’t require industrial-scale investments like electrical cathodic protection systems, making it an ideal choice for homeowners in Gilbert, Arizona, and beyond.

A homeowner in Gilbert, Arizona, was experiencing difficulties with their driveway, which had become uneven due to soil settlement beneath the concrete slabs. The sinking driveway created a noticeable drop between sections, making it challenging to park and causing a tripping hazard when walking to the front entrance.

The homeowner contacted Amanda, our Customer Care Representative, who arranged for a site evaluation with Eli, our experienced Design Specialist. During the assessment, Eli identified that the soil beneath the driveway had compacted over time, likely due to Arizona’s dry climate and occasional heavy rains, which can cause soil erosion and settlement. To address the issue, Eli recommended our PolyLevel® Injection Foam solution, which is designed to lift and stabilize settled concrete quickly and effectively.

Amanda coordinated with the homeowner to schedule the project at a convenient time, ensuring that the driveway would be restored with minimal disruption. Juan, our project foreman, prepared his team for the repair, ensuring that the PolyLevel® solution would be applied accurately for a long-lasting result.

After Project Description:

Following the application of PolyLevel® Injection Foam, the driveway in Gilbert is now level, safe, and structurally sound. The repair, led by foreman Juan and his skilled team, restored the driveway’s functionality and eliminated the tripping hazards. By injecting the PolyLevel® foam beneath the settled slabs, the team lifted the concrete back to its original position, all while minimizing any disruption to the surrounding area.

The PolyLevel® solution offered several advantages. It cured quickly, allowing the homeowner to use the driveway just 30 minutes after application. Its lightweight composition ensured the foam wouldn’t add excess weight to the soil, reducing the chance of future settlement. Additionally, PolyLevel®’s waterproof properties make it resistant to Arizona’s dry and sometimes rainy conditions, which can often lead to soil erosion.

The homeowner expressed satisfaction with the swift and noninvasive repair process, and Amanda followed up to confirm their overall experience. Eli provided guidance on how to care for the restored driveway and suggested periodic inspections to ensure ongoing stability. Thanks to PolyLevel®, the driveway in Gilbert is once again functional, smooth, and ready to withstand the elements for years to come.